Edition 05/2021 - MC ULTIMA- Technical documentation - page 23
SACOME, CONFIDENTIAL Document, it is forbidden to duplicate or communicate this document without previous authorization.
10.2 Programming on general display
Press on the button for 2 seconds.
The display shows the 8 main programming menus :
Some menus are grayed out = inaccessible without entering the navigation password
To access the full menu: Enter the password:
o Press on :
o The display shows :
o You have 8 seconds to enter the password 1956
o The logo is activated and you have access to the full menu :
If a password is not entered, the steps available are only those marked with: (*)
To Next Page
Loading...
