Conti MC ULTIMA - Page 34

Edition 05/2021 - MC ULTIMA- Technical documentation - page 34
SACOME, CONFIDENTIAL Document, it is forbidden to duplicate or communicate this document without previous authorization.
10.7 Settings
 The menu is spread over 2 pages.
 Press on the bookmark dots at the bottom of the screen to navigate from one to another:
 
 Press on the desired digit to highlight it to change the value:
10.7.1 Coffee boiler temperature:
 This menu is used to adjust the temperature of the coffee boilers.
 The temperature indicated by default corresponds to the setting programmed on the left-hand
coffee boiler.
 Press on + and - to change the value:
 The new temperature setting will be changed on all coffee boilers.
All coffee boilers will have the same set point temperature.
 Programmable value: between 80 and 95 ° C
 Press on to validate and escape from the menu.
 For differentiated settings, go to the programming dedicated to each group via the keyboards.