Conti MC ULTIMA - Page 38

Edition 05/2021 - MC ULTIMA- Technical documentation - page 38
SACOME, CONFIDENTIAL Document, it is forbidden to duplicate or communicate this document without previous authorization.
10.7.6 Quality Criteria:
 This menu allows you to adjust the scale of the bar graph when the machine needs to display the
extraction speed in graphical form.
 Press on the button “Display”
 The display shows :
 Press on the desired digit to highlight it to change the value :
 Press on + and - to change the value, and press to validate and escape from the menu:
 These values correspond to the minimum and maximum acceptable flow rate (ml/s) to consider an
espresso product (respectively coffee) as a quality one.
 See chapter “Quality Criteria »
 The group display will position a cursor on a bar graph according to the flow rate and according to
the min / max scale chosen in this menu.
mini cursor maxi
10s 22ml
 - - -  - - - - 