Conti MC ULTIMA - Page 45

Edition 05/2021 - MC ULTIMA- Technical documentation - page 45
SACOME, CONFIDENTIAL Document, it is forbidden to duplicate or communicate this document without previous authorization.
10.9.2 Model
 Allows to declare the machine model that the electronics must manage.
 Value = Coffee or Steam Control
 (Steam control to manage the temperature sensor input linked to the steam control)
10.9.3 Coffee priority
 The « coffee priority » won’t allow the steam boiler filling up during a coffee extraction
10.9.4 Pulse filter
 In progress Pulse filter activated: the machine uses the specific Monte Carlo dose counting
 Pulse filter disactivated: the machine counts the water goes through the flowmeter for the dose
10.9.5 Lighting
 This step allows to choose if during the functioning of the machine the “side white leds” are “switch
off” or “switch on”.
 Value :
o ON = side lights are ON while the machine is running
o OFF = the side lights are OFF during machine operation
 Sometimes useful in "night atmosphere" mode
 Note: in ECO mode the side lights are always off.