Conti MC ULTIMA - Page 47

Edition 05/2021 - MC ULTIMA- Technical documentation - page 47
SACOME, CONFIDENTIAL Document, it is forbidden to duplicate or communicate this document without previous authorization.
10.9.11 PID menu:
 This menu is used to change the values of the PID system of the heating management.
 Press the PID buttons :
 Press on the desired digit to highlight it to change the value:
 Press on + and - to change the value:
 Press to validate and escape from the menu:
 The values of the PID system have been optimized in the factory according to the boilers
volumes and powers.
 WE ADVISE YOU NOT TO TOUCH THESE PARAMETERS