CONTINENTAL AIRCRAFT ENGINE TSIO-550

Need help?

Do you have a question about the CONTINENTAL AIRCRAFT ENGINE TSIO-550 and is the answer not in the manual?

Summary

Engine Inspection and Service

6-4.7.5. Magneto RPM Drop Check

Procedure to check for RPM drop during magneto operation to identify ignition circuit issues.

6-4.7.6. Engine Shutdown

6-4.8.2. Oil Change

Procedure for performing an oil change, collecting samples, and inspecting the filter.

Engine Operation

7-2.3. Engine Operation after Cylinder Replacement and;or Major Overhaul

Non-Overhaul Repair and Replacement

10-6.1.2. Cylinder Installation

Instructions for installing cylinders, including preparation and specific steps.

10-6.1.3. Cylinder Torque

Procedure for torquing cylinder fastening hardware for individual installation.

10-10.2. Solid Nose Oil Seal Installation

Procedure for installing the solid nose oil seal on the crankshaft.

10-10.3. Split Nose Oil Seal Removal

10-10.4. Split Type Nose Oil Seal Installation

Maintenance Standards

C-2.4. Mandatory Overhaul Replacement Parts

C-9. Gasket Maker Application

C-10. Gasket Installation

C-10.1. Crush Washer Installation