What to do if the pilot will not light and makes noise with no spark at pilot burner in my Continental Fireplaces Indoor Fireplace?
If the pilot won't light and makes noise without a spark at the pilot burner in your Continental Fireplaces Indoor Fireplace, and there is no signal from the remote, try reprogramming the receiver code. Also, replace the battery holder (including switch), if applicable.
What to do if there is a faulty wire in my Continental Fireplaces Indoor Fireplace?
If there is a faulty wire in your Continental Fireplaces Indoor Fireplace, replace it.
What to do if the battery holder (including switch) and/or wire is grounding in my Continental Fireplaces Indoor Fireplace?
If the battery holder (including switch) and/or wire is grounding in your Continental Fireplaces Indoor Fireplace, check for a ground (short); repair the ground or replace the wire.
What to do if the battery holder (including wall switch) mounted upside down in my Continental Fireplaces Indoor Fireplace?
If the battery holder (including wall switch) is mounted upside down in your Continental Fireplaces Indoor Fireplace, replace it.
What to do if my Continental Fireplaces Indoor Fireplace battery holder (including switch) is in “off” position, but burner comes on?
If the battery holder (including switch) is in the “off” position but the burner comes on, it suggests the remote control and/or battery holder (including switch) of your Continental Fireplaces Indoor Fireplace is not functioning properly. Reverse it.
What to do if the remote control (if equipped) is not working with my Continental Fireplaces Indoor Fireplace?
Follow the reprogramming instructions for your specific remote. Alternatively, replace the remote control.
What to do if the battery holder (including switch) in my Continental Fireplaces Indoor Fireplace is in wrong position (if equipped)?
If equipped, verify that the 3 position switch on the battery holder (including switch) of your Continental Fireplaces Indoor Fireplace is in the remote position (middle).
How to resolve error with synchronizing on my Continental Fireplaces Indoor Fireplace?
To resolve a synchronization error on your Continental Fireplaces Indoor Fireplace, reset the battery holder (including switch) and the remote control.
What to do if my Continental Fireplaces Indoor Fireplace battery holder, battery holder (including switch) and/or remote control isn’t operational?
If the battery holder, battery holder (including switch) and/or remote control isn’t working, check the battery power and battery orientation.
What to do if I smell exhaust fumes and have headaches from my Continental Fireplaces Indoor Fireplace?
If you smell exhaust fumes and experience headaches, it's possible that your Continental Fireplaces Indoor Fireplace is leaking exhaust fumes into the room. Check that the firebox glass door was properly reinstalled after cleaning. If the issue persists, turn off the appliance and contact a qualified technician.
General| Brand | Continental Fireplaces |
|---|---|
| Model | CDI3-1 |
| Category | Indoor Fireplace |
| Language | English |
To Next Page
