Contixo F19 - Troubleshooting and Technical Support

Technical Support
Trouble Shoong
Drone does not respond
to user controls.
The blades spin, but the
drone cannot take off.
The drone shakes
heavily.
Drone does not stabilize
during flight with fine tuning.
1. The blades distorted.
2. Defecve motor.
The blades distorted. Replace the blades.
1. Replace the blades.
2. Replace the motor.
1. Remote is not synced to
the drone.
2. Insufficient baery power.
1. Refer to page 9-10 (Flight).
2. Recharge the baery.
1. Recharge the baery.
2. Replace the blades.
Problem Cause Soluon
Website: www.contixo.com
- 23 -
1. Insufficient baery power.
2. The blades distorted.
3. The blades Side A and Side
B are reversed.
E-mail: support@conxo.com
Mon-Fri 9:00 am - 4:00 pm PST
Have quesons?
Drone cannot takeoff aer
accident.
Four-axis acceleraon sensor
loses balance.
Recalibrate compass.