Contour NEXT ONE Quick Start Guide

CONTOUR® NEXT ONE Glucose Meter– Quick Start Guide
V1.0 REMOTE CARE PARTNERS PAGE 2
QUICKSTART
Prepare: Wash your hands with soap and water. Dry thoroughly.
Gather supplies: Lancing device, lancet, tissue (for blotting blood from your
finger after the puncture).
Prepare the lancing device: Unscrew the cap, push the lancet firmly into the
device, remove the rounded end of the lancet by turning (save this piece),
screw the cap back on, and adjust the puncture depth (usually 3).
Prepare the meter: Insert a test strip into the meter.
Push the strip into the meter until it stops, and the meter beeps.
Perform the test: Place the lancet device on the finger you wish to use and press
the release button. Place a drop of blood into the absorbent hole of the test
strip. Use a tissue to absorb any extra blood from your finger. The reading will
display in the LCD window within 5 seconds.
Cleanup up: Unscrew the lancet device cap, eject the lancet into a sharps
container or stab the lancet into the rounded end piece that was saved. Pull out
the testing strip from the meter and throw it away.
Understanding the Results
Reference value:
Time of day
People without
diabetes
Before breakfast
(fasting)
<100 mg/dL
Two hours after meals
<140 mg/dL
Source: American Diabetes Association. Standards of Medical Care in Diabetes-
2012.Diabetes Care 2012,35（Suppl.1) S11-S63. Please work with your provider to
determine a target range that works best for you.

Contour NEXT ONE Specifications

General

Measurement Range	20-600 mg/dL
Sample Size	0.6 µL
Test Time	5 seconds
Bluetooth	Yes
Connectivity	Bluetooth
Battery Type	Two CR2032 3V lithium batteries
Memory Capacity	800 results
Weight	36 g
Operating Temperature	5-45°C (41-113°F)
Operating Conditions	Temperature: 5°C to 45°C, Humidity: 10% to 93% RH