Control 4 HC-800 User Manual

™
Box Contents
The following items are included in the HC-800 box:
• HC-800 Controller
• AC to DC power adapter with power cord
• IR emitters (6)
• Antennas (3): ZigBee (1) and dipole antennas (2)
for wireless (WiFi).
• Pluggable Contact/Relay connectors (2)
• Warranty Card
Accessories for Purchase
• Rack Ear Kit (C4-1UREK-B)
• 10’ Antenna Kit (C4-AK-3M)
Warnings
WARNING! To reduce the risk of electrical
shock, do not expose this apparatus to rain or
moisture.
AVERTISSEMENT! Pour réduire le risque de
choc électrique, n’exposez pas cet appareil à la
pluie ou à l’humidité.
WARNING! This CLASS I apparatus must
be connected to an AC mains socket outlet
that has a protective earthing connection
(e.g., third-prong ground conductor). DO
NOT DEFEAT THE PROTECTIVE EARTHING
CONNECTION!
AVERTISSEMENT! Cette appareil de classe I
doit être raccordé à une prise de courant qui
a une connexion Mise à la terre (par exemple,
conducteur avec troisième broche). NE PAS
DÉFAIRE LA CONNEXION DE MISE À LA
TERRE!
For general information about the product, see the
Product pages at http://www.control4.com.
Requirements and Specifications
Prior to installing the HC-800, ensure that Ethernet
network wiring is in place. If you’re using WiFi, see
“Antenna Considerations” which includes information
Supported Model
• C4-HC800-BL – HC-800 Controller, Black
Introduction
The Control4® HC-800 Controller (HC-800) provides
ways to control lights, home theaters, whole-
home music and video systems, and other devices
controlled by IP, infrared (IR), Serial, Contact, or Relay
connections. The Controller has a fast processor,
built-in WiFi, HDMI for audio and video, improved
ZigBee radio, and more.
The HC-800 also provides extensive media
management support for audio and video content,
including CDs, DVDs, Blu-ray Discs, or digital media
stored in connected devices. You can use an external
storage device with USB, NAS, or eSATA connectivity,
and it supports multi-zone audio capabilities, sending
music to various rooms in the home. The device can
be stacked with AV devices or rack-mounted using
the optional rack ears.
After you install and configure the HC-800 (using
the Composer Pro software) along with the other
system components, your customers can control their
system using the On-Screen Navigator, the MyHome
app, System Remote Controls, Touch Screens, or any
other Control4-supported interface devices (sold
separately).
HC-800 Controller
Installation Guide
1

Control 4 HC-800 Specifications

General

Brand	Control 4
Model	HC-800
Category	Controller
Language	English

Summary

Introduction to HC-800 Controller

Supported Model

Specifies the supported HC-800 Controller model.

Box Contents

Lists all items included in the HC-800 controller box.

Accessories for Purchase

Details optional accessories available for purchase.

Safety Warnings

Provides critical safety warnings regarding electrical shock and grounding.

HC-800 Requirements and Specifications

Network Requirements

Ensures home network is in place before setup, wired or WiFi.

HC-800 Technical Specifications

Additional Support Resources

Lists available resources for additional support.

Front View and LED Indicators

Describes the front panel of the HC-800, including LED indicators.

HC-800 Back View and Port Descriptions

Initial Installation Steps

Provides initial steps for installing the HC-800 controller.

Connecting System Devices

Pluggable Terminal Block Usage

Explains the use of pluggable terminal blocks for wiring.

Connecting to Contact Ports

Details how to connect devices to the HC-800's contact ports.

Relay and Serial Port Connections

Connecting to Relay Ports

Details how to connect devices to the HC-800's relay ports.

Serial Port Configuration

Describes how to connect devices using the HC-800's serial ports.

IR Emitters and IR Blaster Setup

Instructions for controlling devices via IR commands.

Antenna and Network Considerations

Antenna Usage Options

Guidance on using ZigBee and WiFi antennas.

WiFi Connection Guidelines

Steps for connecting the HC-800 wirelessly via WiFi.

Optional Installation and Storage

Rack Mounting Installation

Instructions for installing the HC-800 in a rack.

Setting Up External Storage Devices

How to connect and configure external storage devices.

Composer Software Configuration

Driver and Properties Setup

Details on selecting the HC-800 driver and configuring properties.

Troubleshooting and System Recovery

Factory Restore Button Procedure

Procedure to restore the HC-800 to factory default settings.

Identification Button Functions

Explains the identification button for system identification and resets.

Regulatory, Warranty, and Document Info

Regulatory and Safety Information

Information on regulatory compliance.

Warranty Information

Provides information about the limited warranty.

About This Document

Contains document part number and revision date.