Control 4 T4 Series - User Manual

11
Supported models
• C4-T4T8-xx 8" Tabletop Touchscreen (black or white)
• C4-T4T10-xx 10" Tabletop Touchscreen (black or white)
Introduction
The Control4® T4 Series Tabletop Touchscreens oer complete
system control in an elegant, compact, and portable design. The
touchscreens are equipped with a full capacitive screen, audio
and video Intercom (with the built-in camera) using SIP, and
more.
This touchscreen can be located anywhere, and the convenient
recharging station enables it to be used as either a tabletop or
portable interface. The touchscreen uses an AC power adapter
for power and Wi-Fi for network connectivity.
Note: 802.11b is not recommended for video intercom.
We recommend using Wireless-N. See “Specifications”
for more information.
Box contents
• Tabletop Touchscreen
• Recharging station
• Recharging station power cord
Accessories available for purchase
• Tabletop Permanent Mount Kit (C4-T4PMNT)
• T4 Touchscreen Tabletop 8" Base (C4-T4TBS8)
• T4 Touchscreen Tabletop 10" Base (C4-T4TBS10)
Warnings
Warning! This product must be grounded in accordance
with the National Electrical Code (NEC) requirements.
Avertissement ! Ce produit doit être fondu selon les
conditions électriques nationales de code (NEC).
Caution! Do not place the touchscreen near sources of
heat or expose to direct sunlight for an extended time.
Avertissement ! Ne placez pas l’unité près des sources
de chaleur ou exposition pour diriger la lumière du soleil
pendant une période prolongée.
Caution! This product generates heat. The room must
have adequate ventilation or the ability to dissipate heat
eectively.
Avertissement ! Ce produit produit de la chaleur. La salle
doit avoir à ventilation proportionnée ou la capacité
d’absorber la chaleur ecacement.
Caution! Use this product only in dry locations.
Avertissement ! Employez ce produit seulement dans
des endroits secs.
Caution! Do not use pens or sharp objects to navigate
or make selections on the touchscreen. To select an item
or scroll through a list, use your fingertip.
Avertissement ! N’employez pas les stylos ou les objets
pointus pour diriger ou pour faire des choix sur l’écran.
Pour choisir un article ou un rouleau par une liste,
employez votre bout du doigt.
Caution! Improper use or installation can cause
DAMAGE OF PROPERTY.
Avertissement ! L’utilisation ou l’installation inexacte
peut causer DAMAGE DE PROPRIÉTÉ.
Important! Using this product in a manner other than
outlined in this document voids your warranty. Further,
Control4 is NOT liable for any damage incurred with the
misuse of this product. See “Warranty.”
T4 Series Tabletop Touchscreens
Installation Guide

Control 4 T4 Series Specifications

General

Resolution	1280 x 800 pixels
Connectivity	Ethernet, Wi-Fi
Power Supply	PoE (Power over Ethernet)
Mounting Options	Wall mount, table stand
Processor	Quad-core
Storage	8GB

Summary

Supported models

Introduction

Warnings

Specifications and requirements

Touchscreen placement

Connect power and Wi-Fi

Connect to Wi-Fi

Steps to configure the touchscreen's wireless network connection.

Mounting

Portable use

Using the touchscreen off the charging station.

Permanent mount

Permanently mounting the touchscreen using an optional kit.

Troubleshooting

To power cycle the touchscreen

Restarting the touchscreen by cycling power.

To restore to factory defaults

Resetting the touchscreen to its original factory settings.

Additional resources

Warranty and legal notices

Information regarding product warranty and legal terms.

More help

Contact information and links for further assistance.

Introduction

Installing the wall box

Warnings

Specifications and requirements

Installation

LED indicator

Description of the touchscreen's LED status indicators.

Power and network installation options

Option 1: Ethernet connection with PoE

Using PoE for Ethernet power and network connectivity.

Option 2: Ethernet connection with AC

Using Ethernet with AC power for network and power.

Option 3: Wi-Fi connection with AC

Using Wi-Fi with AC power for network and power.

Connecting to a wired network

Connecting AC power

Attach the power box and touchscreen

Configuration

Configure the touchscreen for wireless (optional)

Steps for setting up the touchscreen's Wi-Fi connection.

Configure the touchscreen for Ethernet

Steps for setting up a static IP address for Ethernet.

Add and configure in Composer Pro

Integrating the touchscreen into the Control4 system using Composer Pro.

Troubleshooting

Boot up time

Information on the touchscreen's startup duration and LED behavior.

Unresponsive screen

Troubleshooting steps for an unresponsive touchscreen.

Removing the touchscreen from the wall

Instructions for safely detaching the touchscreen from its wall mount.

Additional resources

Warranty and legal notices

Details on product warranty and legal information.

More help

Links and QR codes for the latest document version and support.

Introduction

Installing the wall box

Additional resources

Important Safety Instructions

USA & Canada Compliance

RF Radiation Exposure Statement

Europe Compliance

WEEE Compliance

About this Document