Boost Mode & Power Level Times
Activating Boost Mode will take ChlorMaker out of regular production mode or standby mode, and re-start the
production of chlorine according to the following table. To activate Boost Mode simply press the Boost Mode
Button. The Salt Light will begin flashing indicating that ChlorMaker is in Boost Mode. IMPORTANT: The
ChlorMaker can’t make chlorine faster. The Boost Mode keeps it on for a longer period of time. If the spa
chlorine has dropped to 0 PPM from heavy usage, chlorine may need to be added.
Power Level Normal Time
1 00:02:00 00:12:00
2 00:07:30 00:45:00
3 00:15:00 01:30:00
4 00:30:00 03:00:00
5 00:45:00 04:30:00
Power Level Normal Time
6 01:00:00 06:00:00
7 01:30:00 09:00:00
8 02:00:00 12:00:00
9 02:30:00 15:00:00
10 03:00:00 15:00:00
# ChlorMaker DO Included Parts
1 Cell with 10 foot cable
2 Power supply with 15 foot cable
3 ChlorMaker control box
4 Cable clips (2)
5 SS Screws: #6x1/2, #6x5/8 - (2 of each)
6 LaMotte test strips, salt and general spa
7 Owners manual
ChlorMaker Included Parts
When opening the package make sure all of the parts
are included. The serial number is on the control box
and on the last page of this manual.
Vacation Mode
When vacation mode is activated the ChlorMaker will decrease the on time to make less chlorine. Vacation
mode is automatically activated when no buttons are pressed for over a week. When activated, the lights will
flash RED and BLUE instead of GREEN every 10 seconds in standby mode. To exit vacation mode press any
button. The amount the time is decreased is:
No button pressed for 1 to 2 weeks: On time * 0.75
No button pressed for over 2 weeks: On time * 0.5
To Next Page
Loading...
Need help?
General
