CONTROLS, INCORPORATED
C O N T R O L S Y S T E M S & S O L U T I O N S
9
11) Fuel / Run - Relay will be active during an engine start request and while the engine is
running.
12) Custom 1 - Reserved for OEM applications.
13) Preheat - Relay will be active during programmed preheat period. Used to drive a preheat
relay.
Digital Function Activation
1) Off / Always / Run – Describes when the parameter will be monitored for alarm conditions.
Run refers to when the engine is running. Off disables the alarm conditions. Always enables
the alarm constantly regardless of engine state.
2) Alarm Delay – The time period, after Sender Check Bypass, that the parameter must be on
the alarm condition before the alarm becomes latched.
To Next Page
Loading...
