To Next PageTo Next Page
Need help?Do you have a question about the Controls C4F-F10198 and is the answer not in the manual?
General| Brand | Controls |
|---|---|
| Model | C4F-F10198 |
| Category | Control Panel |
| Language | English |
Settings for throttle type, speed, and ramp rate.
Explains Vernier and Multistate throttle control modes.
Details manual control using up/down buttons for engine start/stop/throttle.
Lists functions for each pin of the 14-pin connector.
Lists functions for each pin of the 23-pin connector.
Lists pin functions for the 21-pin engine harness connector.
Lists pin functions for the 3-pin accessory connector.
Explains ECU actions for out-of-range parameters like de-rating or shutdowns.
How the panel displays trouble codes and indicator lamps.
Defines when parameters are monitored for alarm conditions.
Time period before an alarm condition becomes latched.
Available relay assignments for different uses.
Defines relay contact behavior (normally open/closed).
Defines whether a relay is activated upon power up.
Procedure to access the menu system.
Instructions for navigating through menu options.
Procedure to exit the menu system.
Steps to modify a setting within the menu.
Categories for viewing engine and system information.
Categories for configuring system settings (password protected).
Setup options for digital inputs.
Setup options for relay outputs.
Setup options for engine throttle control.
