HU-15OG
6
3. SAFETY REGULATIONS
4. PACKING
The HU is delivered in recyclable packaging that should be kept for re-shipping the unit
for maintenance activities. Any shipment using other packaging could cause damage to
the HU for which the manufacturer cannot be held liable.
It is possible that some traces of water could be found in the packaging; all the
functions of the HU are thoroughly tested during the quality control and, for this reason,
some water could still remain in the HU before it is packed.
The package contains:
- HU humidier.
- Power cord.
- Instructions for use.
- PVC connection to 40 mm.
IMPORTANT
The humidier has an open water tank. Any overow of the water tank could
damage the electronics inside the humidier.
The following measures must always be observed:
- Always disconnect the 230 V mains voltage from the humidier before
moving it and/or carrying out maintenance activities.
- Always keep the humidier horizontal and motionless while it is in
operation and for up to 2 minutes afterwards.
- Ensure that the water is always discharged via the outlet and ensure that
this is never blocked.
- The humidier may only be dismantled by authorized Contronics
technicians.