888-Convaid (266-8243)
97
Cruiser 14
INSTRUCTIONS
Attach Canopy
1. Remove Canopy from box.
2. Align plastic Canopy Retaining Clips with upper tubing on back of the chair.
Push on clips with the ball of your hand unti l they snap into place.
Caution: Keep ngers away from moving parts.
3. To open, grasp top of Canopy and push forward and rotate downward.
4. To close the Rear Flap of Canopy, attach the Velcro
®
strap to Velcro
®
receiving
patch on the edge of the Canopy Hood.
5. To fold, repeat above steps in reverse order.
To Next Page
Loading...
