USING THE COOLER
When this appliance is used as an air cooler,
it should be filled with water and the cool
knob turned to the “COOL” position (Fig 14).
(1) is selected for quietest
operation (Fig 14).
(3) is for maximum cooling
(Fig 15).
. This cooler may be
used as a fan only. Set the cool knob to
position “0” (Fig 15).
Low fan speed
High fan speed
Fan only (ventilation)
14
ILL1433-A
15
ILL1434-A
5
COND IT IO NI NG OF TH E AS PE N
COOLING PAD
To get the best performance from your
cooler, we recommend that when first used it
is run with water for at least 10 minutes at the
setting in Fig 16.
During this process the water becomes
slightly yellow, and there is a natural smell of
damp wood. This is normal.
AIRDIRECTIONCONTROL MILLENIA /
MASTERCOOL
The cooler is provided with air guide vanes
which can be adjusted as required to direct
the air flow.
Models Millenia and Mastercool are
adjusted manually by sliding the levers on
the front panel (Fig 17).
IL L 8 7 7 -C
MILLENIA /MASTERCOOL
17
16
ILL1435-A
To Next Page
Loading...
