Risk / hazard Where and in which situations will
the risk/hazard exist?
What to do / safety equipment
Risk of burns posed by
hot surfaces
■
On the air vent
■
On the exhaust ducts
■
Everywhere on the inside
■
On the outside of the unit door
■
Let the unit cool down before mak‐
ing changes
■
Wear the required personal pro‐
tective equipment
Piercing hand hazard Whenever mounting the unit
■
Exercise caution when performing
maintenance work
■
Wear the required personal pro‐
tective equipment
Pinch point hazard for
hands and fingers
■
Whenever mounting the center
adapter
■
Whenever mounting the top unit
■
Whenever moving stacking kits
with rollers
■
When placing the unit on its back
■
Exercise caution when performing
maintenance work
■
Wear the required personal pro‐
tective equipment
Slip hazard When flipping the unit over
■
Exercise caution when performing
maintenance work
■
Always keep the floor around the
unit dry
Shear hazard Whenever mounting the top unit Exercise caution when performing
maintenance work
Cut hazard
■
When knocking out the perforated
knockout on the front plate and on
the door contact switch’s holding
plate
■
When knocking out the perforated
knockout on the top unit’s bottom
■
Exercise caution when performing
maintenance work
■
Wear the required personal pro‐
tective equipment
■
Remove the knockout as indicated
in the instructions and deburr the
corresponding edges
2 For Your Safety
10