Convotherm 4 Assembly Instructions

Table of Contents
1 General 6
1.1 Environmental Protection 6
1.2 About These Assembly Instructions 7
2 For Your Safety 8
2.1 Basic Safety Instructions 8
2.2 Your Stacking Kit’s Intended Use 8
2.3 Additional Hazards and Safety Measures During Transport and Setup 9
2.4 Additional Hazards and Safety Measures During Installation, Placement into
Operation, Maintenance, and Removal from Service
11
2.5 Additional Hazards and Safety Measures During Operation and Cleaning 13
2.6 Staff and Work Area Requirements 16
3 Stacking kit version layouts and components 18
3.1 Combinations allowed 18
3.2 Versions and Components 19
3.3 Center Adapter for Electrical Units 21
3.4 Center Adapter for Gas Units 23
3.5 6” base 25
3.6 12” base 26
3.7 Base with rollers 27
3.8 Marine Model Base 28
4 Planning for Setup and Assembly 29
4.1 Working Safely During Setup and Assembly 29
4.2 Installation Location Requirements 29
4.3 Required Tools and Materials 30
4.4 Basic installation procedure 31
5 Assembly 32
5.1 Installing the Exhaust Duct Extension on the Bottom Unit 32
5.2 The bottom combi oven is mounted on the base 35
5.3 Installing the Center Adapter 39
5.4 Installing the Top Unit 46
5.5 Wall Anchoring (Optional) / Marine Model / Retaining Element 57
5.6 Affixing Warning Labels 58
5.7 Additional Work 59
6 Placing into operation 60
6.1 Procedure for Placing the Unit into Operation 60
7 Cleaning and maintenance 61
7.1 Cleaning Work 61
7.2 Maintenance Work 61
8 Removing from service 62
8.1 Procedure for Removing the Unit from Service 62
Table of Contents
5

Convotherm 4 Specifications

General

Model	Convotherm 4
Type	Combination Oven
Temperature Range	30°C to 300°C
Hygienic Door Handle	Yes
Construction	Stainless steel
Cooking Modes	Convection, Steam, Combination
Energy Source	Electric
Cleaning System	Automatic Cleaning System
Power Supply	400V