6 Moving and setting up the appliance
ConvoVent 4 / ConvoVent 4+ 54
Components of the lighting unit for ConvoVent 4 and ConvoVent 4+
Item Name
1
Power cable
2
Halogen lamp
3
Mounting plate
4
Alignment plate
5
Fixing screws for alignment plate
6
Fixing bolts for mounting plate
Installing the lighting unit for ConvoVent 4 and ConvoVent 4+ (optional)
The following additional steps are necessary for installing the lighting unit:
1.
Undo the 2 fixing screws for the alignment plate.
2.
Remove the 2 fixing bolts and plain washers on the mounting
plate.
3.
Take the 3 baffle filters out of the condensation hood.
See: Operating instructions for the condensation hood
To Next Page
Loading...