What to do if my Cooke & Lewis CLGCH60-CR1 Ventilation Hood suction performance is reduced?
- SSandra GrahamAug 3, 2025
If you notice reduced suction performance in your Cooke & Lewis Ventilation Hood, there are several potential causes and solutions: * Ensure the speed setting isn't too low; try selecting a higher speed. * Check the distance between the hood and the hob: For gas hobs, it should be 750mm; for electric hobs, 650mm. Readjust if necessary. * Make sure that the top vent isn't obstructed. Clear any obstructions. * If using an optional vent kit, consult the manufacturer's instructions.