EasyManua.ls Logo

Cooke & Lewis CLAGB60 - User Manual

Cooke & Lewis CLAGB60
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
V31217
CLAGB60 3663602842675
CLAGB90 3663602842682
This file is the property of Kingfisher Group Plc. No copying, alteration or amendment is permitted without
written authorisation from the Kingfisher Brand Team.
V1.1
ᇹࡒמ֣ăěŗʗɡ2/5ǟϨҨ뼷ɑϨǢࣂĀߩݨԶѤӍ.CDɡӴҲŀмŗ฼ʸߩݨȞƥԶѤ뼶
ǕNJɫĀܨ࠰ᇹࡒמ֣ǨĈ뼶λǀᇹࡒȞײ֣ӿĀΒǚǜNj뼷ăīŢǕNJɫɘDŽҫ뼵ȻƑͱզϐ뼶
PROCESS
BLACK
SEPARATIONS JOB INFO
VERSION #
PID #: 00001
Agency job #: ATL10387
Product Description: SM_100000036-
100000037_03A6 v2 60CM-03A6
90cm Angled Glass Hood 3mm
Brand: Xxxxxxxxxxxxxxxxxxxxxxx
Brand Contact: xxxxx@xxxxx.com
Barcode: 3663602842675 / 3663602842682
Vendor: Xxxxxxxxxxxxxxxxxxxxxx
No. of new line drawings: xx
Page size A5 / No. of printed pages 80
R 3 R 5 6 7 8
00/00/17
INITIALS
14/08/17
AS
23/11/17
DLS
08/11/17
TjB
00/00/17
INITIALS
00/00/17
INITIALS
00/00/17
INITIALS
00/00/17
INITIALS
1
NOTE: A4 and has been resized to A5

Other manuals for Cooke & Lewis CLAGB60

Questions and Answers

  • K
    Keith BurkeAug 3, 2025
    Why do cooking smells linger when using my Cooke & Lewis CLAGB60?
    • A
      April MartinezAug 3, 2025
      If cooking smells linger when using your Cooke & Lewis Ventilation Hood, it may be because the carbon filter is not fitted in recirculation mode or is full of grease. Fit a carbon filter or replace the carbon filter.
  • J
    Joshua MeyersAug 10, 2025
    Why is my Cooke & Lewis CLAGB60 Ventilation Hood suction performance reduced?
    • J
      Jeremy BullockAug 11, 2025
      Reduced suction performance in your Cooke & Lewis Ventilation Hood can occur for several reasons. The speed may be too low, so select a higher speed. The aluminum filters might be dirty, so clean them. The top vent could be obstructed, so clear any obstruction. If fitted, the optional vent kit might be twisted, so ensure it is fitted according to the manufacturer’s instructions. Also, the installation may not comply with the manufacturer's instructions; the vent hose should be the correct diameter throughout with no reductions or restrictions.
  • A
    alyssalopezAug 18, 2025
    What to do if my Cooke & Lewis CLAGB60 is vibrating excessively?
    • L
      lynchrobertAug 18, 2025
      Excessive vibration in your Cooke & Lewis Ventilation Hood can be due to several factors. The appliance might not be installed properly on the brackets, in which case you should take down the appliance and check it is properly fixed. Alternatively, the fan blade could be damaged, so switch off the appliance and have it repaired by qualified service personnel only. It may also be caused by the fan motor not being fixed tightly.
  • T
    Trevor ParkerAug 26, 2025
    What to do if both the light and motor do not work on my Cooke & Lewis CLAGB60 Ventilation Hood?
    • E
      Elijah DavisAug 26, 2025
      If both the light and motor do not work on your Cooke & Lewis Ventilation Hood, the light bulb may have blown, so replace it with a bulb of the correct rating. Also, the power connection may be loose, so check the power supply.

Summary

Checking Instructions

Safety

General safety warnings and precautions for installation and use of the appliance.

Installation

Direct Connection

Instructions for direct electrical connection to the mains supply, including wiring and earthing.

Technical Data

Troubleshooting

Commercial Guarantee

Recycling and Disposal

Information on how to properly recycle and dispose of the appliance at the end of its life.

Distributor and Manufacturer Information

Cooke & Lewis CLAGB60 Specifications

General IconGeneral
BrandCooke & Lewis
ModelCLAGB60
CategoryVentilation Hood
LanguageEnglish

Related product manuals