Cookworks MY-CS6007WP - Troubleshooting

ISSUE-1 2/8/2017 18
Troubleshooting
Observation Possible cause Action to take
Difficult to
close lid
Seal not installed
correctly.
Refit the seal
Float valve is catching on
the push rod.
Gently push the rod to release.
Lid won’t
open
Cooker still pressurized
and float valve still raised.
Allow pressure to normalize.
Steam leaks
from lid
Seal ring incorrectly fitted
or not installed.
Fit / refit the seal
Seal ring damaged Replace seal
Lid not closed correctly Refit lid
Steam leaks
from float
valve
Food debris on float
gasket
Clean around gasket
Float valve damaged Replace gasket
Steam coming
out of exhaust
valve
Exhaust valve not in
pressure position.
Turn exhaust valve to
position
Float valve not
rising
Too little food /
water in
bowl
Add liquid
POWER
indicator not
illuminated
Damaged power cable Replace cable
Is there a power cut?