3.0 Use of the Appliance
1. Make sure that all packaging material and foreign objects
are removed from the appliance.
2.
Clean the appliance with detergent before switching it on,
dry it with a soft, clean cloth and let it ventilate for a while.
3.
It is advised to keep the appliance in an upright position
for at least 2 hours after transport before using it.
4. It is advised to switch on the appliance and check its
operation before positioning it at the nal place.
5. See separate instructions for detailed guidelines on the
promotional display appliance assembly. In case the
instructions are missing, please contact the seller or
your local service provider.
6.
Place the shelves on the shelf holders.
7. It is advised to switch on the appliance and check its
operation before positioning it at the nal place. Connect
the plug into the socket.
8. Leave the appliance connected in an empty state for 2
hours to check the functioning before adding goods for
the rst time. Do not load food to be chilled before
the temperature display reads +6°C.
9.
Apply brakes to prevent the appliance from moving.
1. Attach shelf supports to shelf rails at the desired height.
2. Slide the shelf into the appliance and mount it on supports.
3. Make sure the shelf stays stable on its supports.
IMPORTANT!
All packaging materials are recyclable.
IMPORTANT!
Wear safety gloves during the installation.
3.1. Starting Up
1
2
3.2 Shelf Installation
9
To Next Page
Loading...