COOL Reefer - User Manual

Questions and Answers

J
Julia GonzalesAug 1, 2025
Why is my COOL Reefer Accessories appliance’s performance level of cooling not enough?
- S
  Sergio EdwardsAug 1, 2025
  If your COOL Accessories appliance's cooling performance is insufficient, first, ensure that the ambient temperature and relative humidity aren't too high by installing the appliance in an adapted environment. Next, check for any restrictions to airflow by ensuring adequate distance between the appliance and its surroundings, clearing any blockages from the airflow inlets/outlets, and ensuring the condenser is clean. Also, make sure you haven't overloaded the appliance with too many goods; fill it according to the instructions. Finally, verify that the temperature setting is correct using the digital controller. If these steps don't resolve the issue, the cooling system itself may be defective, and you should contact the seller or your local service provider.
W
William SmithAug 5, 2025
How to fix COOL Reefer Accessories LED lights that do not operate?
- M
  mnovakAug 5, 2025
  If the LED lights on your COOL Accessories appliance aren't working, first, check that the appliance is switched ON. If it is, ensure the lights are turned ON using the digital controller. If the lights still don't operate after these steps, the LED lights may be burned out, and you should contact the seller or your local service provider.
J
james96Aug 9, 2025
What to do if the digital controller does not operate on my COOL Accessories appliance?
- W
  William DavisAug 10, 2025
  If the digital controller on your COOL Accessories appliance isn't operating, first, make sure the appliance is switched ON. If the controller still doesn't work, the electronic board may be defective, and you should contact the seller or your local service provider.
B
Brent StewartAug 14, 2025
Why is there water condensation on the surfaces of my COOL Accessories appliance?
- R
  rmunozAug 14, 2025
  If you notice water condensation on the surfaces of your COOL Accessories appliance, it's likely due to a high ambient temperature and/or relative humidity. To resolve this, install the appliance in an adapted environment.
O
orozcodanielAug 18, 2025
Why does my COOL Accessories appliance get too cold/ice formation on inner surfaces?
- E
  Edward HallAug 18, 2025
  If your COOL Accessories appliance gets too cold or you notice ice formation on inner surfaces, it could be due to a low ambient temperature. To fix this, install the appliance in an adapted environment. If the problem persists, the temperature regulation may be incorrect, and you should contact the seller or your local service provider.
Q
qriversAug 23, 2025
What causes excessive ice formation in the evaporator area of a COOL Reefer Accessories appliance?
- S
  Sharon LongAug 23, 2025
  If you're experiencing excessive ice formation in the evaporator area of your COOL Accessories appliance, it could be due to a high ambient temperature and/or relative humidity. Installing the appliance in an adapted environment can help. If the issue continues, the heating element may be defective, and you should contact the seller or your local service provider.
V
Vickie NicholsOct 27, 2025
What to do if my COOL Reefer Accessories appliance does not operate?
- M
  mahoneyallenOct 27, 2025
  If your COOL Accessories appliance isn't operating, first, ensure the appliance is switched ON. Next, verify that the power plug is correctly connected to the power supply. If the issue persists, wait 5 minutes and restart the appliance in case the power relay tripped. If the problem continues, it could be due to a damaged power cable/plug, a blown fuse/tripped circuit breaker, or restricted airflow. In the first case, contact the seller or your local service provider. In the second case, replace the fuse/reset the circuit breaker. In the third case, check the distance between the appliance and its surroundings to ensure nothing blocks the airflow inlets/outlets, and that the condenser isn't dirty. If none of these steps work, the digital controller may be defective, and you should contact...