conserves battery life and storage space, ensuring you
capture footage when it matters most.
【
Monitor Detection
】
Detection sensitivity
It refers to the level at which the camera's sensors react to
detect motion. This setting allows you to adjust how easily
the camera responds to movement in its field of view. The
sensitivity can typically be set to different levels, such as
High, Medium, and Low.
Motion Detection Filter
Turn on the "Monitor Detection Filter" feature. Open the
"Detection Area". In this page, you can click (Add New
Area) to customize the graphical interface to draw an area,
indicates that you want the camera to work in this infrared
sensing area. After setting the sensing area, click (Save
Area), and your trail camera will only work on the infrared
sensing trigger you drew.
For example: No matter where you install the camera, the
customized infrared sensing area you see on the APP will
be the area where your camera works. If an animal appears
outside the customized infrared sensing area, the camera
will not be triggered to work.
Note: Please be careful when turning on this function.
Turning on this function may cause the camera to take a
To Next Page
