6. Before operating the appliance, please ensure that the air inflow and outflow apertures are not covered. The air exhaust
nozzle must always be freely accessible when the appliance is in operation.
7. Removable covers and tanks must be inserted correctly before switching the appliance on.
8. Position the exhaust air hose and the adjustable window panel set as illustrated in the adjacent figures.
9. Detailed information about the installation of the exhaust air hose and the window panel is available in the Chapter
entitled “Installation” in this use instructions document.
10. Do not use any extension cable, a multi-socket that is also used by other electrical appliances or a continuous speed
regulator. This can lead to overheating, causing a fire.
11. Connect the dehumidifier only to a functioning, single-phase, earthed socket with the mains voltage specified on the
ratings plate. The wall socket should be easily accessible.
12. Unwind the power cord fully and insert the power plug into the power socket. Not unwinding the coiled cord can lead to
overheating, causing a fire. Do not touch the power cable with wet hands.
13. The POWER control light flashes.
14. Now press the
power key to activate the appliance. Press the key again to deactivate the appliance.
8
8
NOTE
Wait for 3 minutes before restarting the appliance after it is deactivated unintentionally (power failure) or
intentionally.
To Next Page
Loading...
