Cooper Security 9651PD - Sounder and Strobe Testing

4. Special Functions
Page 16
In the log, user codes are represented by numbers as follows:
U00
Installer
U01
User 1
U02 to 50
Users 2 to 50
U51
Control unit
U53
Remote reset
Key 7: Turning the Chime On and Off
Your system may be programmed so that a chime tone sounds when certain
doors are opened while the system is unset. You can turn this on and off.
1.
Key in an access code (or present a tag).
2.
Press 7 to toggle chime on and off.
The display shows (for example):
Chime = ON
When you turn chime on, the keypad
confirms with a double "beep".
3.
Press .
Key 8: Testing the Sounders and Strobe
You can test that the sounders and strobe are working. The system turns on
each sounder in turn for three seconds.
Note: The strobe flashes for 10 seconds to give you time to see it.
1.
Key in an access code (or present a tag).
2.
Press 8 to start the test.
The display shows:
Test: Bell
Test: Strobe
Test: Speaker
Test: Keypad