Cooper Security 9651PD - Page 28

Appendix
Page 24
Message
Meaning
Tech Z== Alarm
Technical alarm in zone
==
Tech Z== Rstr
Technical alarm in zone
== reset
Tel Line Fault
Line fault on telephone
line
Tel Line Rstr
Line fault reset on
telephone line
U== Change U==
User == changed
access code for user ==
U== Delete U==
User == deleted access
code for user ==
U== Off-Site
Installer exited from
programming mode
U== On-Site
Installer entered from
programming mode
U== System Reset
User – reset system
U== Time/Date
Time and date user
reset the system
U== Z== Omit
User omitted zone ==
U== Z== Unomit
User unomitted zone ==
UserCode req off
No user code before
installer code
UserCode req on
User code before
installer code
XT ACFl Rst Z==
Mains power supply
restored in zone ==
XT ACFl Z==
Mains power supply
failed in zone ==
XT BatFl Rst Z==
Battery reconnected in
zone ==
XT BatFl Z==
Battery fault in zone ==
XT Fault Z== Rst
Zone of type „Fault‟
reset
XT Fault Zone ==
Zone of type „Fault‟
active
XT LoBat Rst Z==
Low battery reset on
radio zone ==
XT LoBat Z==
Low battery detected on
radio zone ==
XT PwrFl Rst Z==
Power output fault reset
in zone ==
XT PwrFl Z==
Power output fault in
zone ==
Message
Meaning
Z== Lock Out
The system locked out
the zone when
attempting to rearm at
the end of the bell run
time.
Z== Lock Out Rst
The system restored a
locked out zone zone.