To Next PageTo Next Page
Need help?Do you have a question about the Cooper Surgical frigitronics CE-2000 and is the answer not in the manual?
General| Brand | Cooper Surgical |
|---|---|
| Model | frigitronics CE-2000 |
| Category | Medical Equipment |
| Language | English |
Labeled diagram of the console's front panel, showing key components.
Labeled diagram of the console's rear panel and attached gas cylinders.
Technical details including dimensions, weight, and pressure ranges.
Specifies the intended medical applications for the cryosurgical system.
Important warnings and precautions for safe and proper use of the device.
Provides general information about the device's operation and materials.
Instructions for unboxing and initial assembly of the cryosurgical system.
Procedures for safely venting nitrous oxide gas exhaust from the system.
Guidelines for correctly connecting cryosurgical probes to the console.
Specific instructions for installing probes with temperature sensing capabilities.
Information on the function and battery requirements of the temperature display.
Step-by-step guide for safely replacing cryosurgical probes.
Procedure for safely swapping nitrous oxide gas cylinders.
Instructions for properly turning off and securing the cryosurgical system.
Guidelines for cleaning and general upkeep of the cryosurgical system.
Addresses issues where the probe tip fails to achieve freezing temperatures.
Solutions for when the probe tip does not warm up or thaw as expected.
Troubleshooting steps for unexpected thawing of the probe tip during operation.
Diagnosing issues with the temperature display or its backlight functionality.
Rectifying problems with control knob functionality on the console.
Resolving problems with probe insertion and potential leaks at the connection point.
Fixing issues where exhaust hoses detach from the console or probe.
Lists part numbers and descriptions for console components.
Lists part numbers and descriptions for mobile carrier components.
Details on various probes for ophthalmic procedures, including specs.
Specific probes designed for pediatric retinal cryosurgery.
Probes indicated for the treatment of trichiasis.
Guidance on steam and ethylene oxide sterilization methods for probes.
Instructions for sterilizing probe sleeves separately or attached.
Procedure for replacing the filter assembly cartridges.
