3
Identification
Figure 1 Figure 2
Front View Rear View
1. Foot Pedal 11. Cylinder Yokes (2)
2. Locking Casters 12. System Exhaust Connector
3. Mobile Equipment Carrier 13. Foot Pedal Connection
4. Utility Drawer 14. Pressure Regulator Control
5. CE-2000
™
Console 15. ON/OFF Control
6. Digital Temperature Indicator 16. Identification Plate
with Backlight (+75 ºC to -150 ºC) 17. Cylinder Pressure Gauge (0-1000 psi) [0-70 kg/cm
2
]
7. Regulated Pressure Gauge 18. 30 in. (76.2 cm) Delivery Line
8. Probe Jack and Dust Cap 19. Cylinder Retainer Straps
9. Probe 20. Rear Exhaust Tube (not shown)
10. Probe Exhaust Connector Tube and Dust Cap 21. Backlight Toggle Switch
22. Battery Compartment: Two 9-volt Batteries Required
23. Molding Trim
Specifications
CE-2000 Console Mobile Equipment Carrier
Size: 7 in. (17.8 cm) high, 12 in. (30.5 cm) wide, 11 in. (27.9 cm) deep Size: 40.5 in. (102.9 cm) high, wide
Weight: 10.5 pounds (4.8 kg) 19.5 in. (49.5 cm) wide
25 in. (63.5 cm) deep (with wheels)
Console Regulated Pressure: 400-625 psi (28-44 kg/cm
2
)
Table Top: 19.5 in. (49.5 cm) wide
Nitrous Oxide Gas Operated
16.5 in. (41.9 cm) deep
Weight: 58 pounds (26.3 kg)
Type “E” Nitrous Oxide Cylinders
(2 required), or 20 pounds (9.1 Kg) Nitrous Oxide
cylinder (2 required)
NOTE: To convert psi to Kg/cm
2
multiply by 0.07
1
2
3
4
5
6
7
8
9
10
11
16
12
13
14
22
15
21
17
18
19
23
To Next Page
Loading...
