Cooper M800 - Selecting the Wards to Unset

12
If there is no sound (you have not started the entry timer):
If there is no sound (you have not started the entry timer):If there is no sound (you have not started the entry timer):
If there is no sound (you have not started the entry timer):
0=Unset System
[Ent]=User Level
0=Set Selection
[Ent]=User Level
If you have not started the entry timer, you
will see one of the screen shown opposite.
You can now do one of the following:
•
••
• If necessary, scroll (| or ¬) to display
"0=Unset System", then press 0. If the
system does not unset automatically,
continue from Selecting the Wards to
Unset (next heading).
•
••
• Press 0 at "0=Set Selection" – to set
wards that are not currently set. Refer to
the setting instructions for further details
(page 8).
•
••
• Press r – to select a ward group to
unset. See Selecting the Ward Groups
to Unset (next page).

Pressing [ when “[ENT]=User Level” is
displayed takes you into the User
menus – see the Manager's Manual.
Selecting the Wards to Unset
Your user code settings
1
determine the
wards you can unset and whether they
unset automatically.
Unset wards :-
Ward > **......
If you see the screen shown opposite, use
the numeric keys (e.g. 1) to select the
wards to unset, then press [. Any ward
numbers shown will be unset. (A “*”
indicates that the ward will not be unset,
1
User option 2-4-1