7
Chapter 2: Operating your Alarm System
Getting Started
Accessing the System
Before you can set, unset or select other
options, you must enter your unique user
code or present your proximity tag (if used).
The user code may be 4 or 6 digits,
depending on how your system is set up
1
.
You have a user code or a proximity
tag, not both.
Selecting Options
After entering your user code or presenting
your proximity tag, the Set/Unset menu is
displayed if there are no alerts to reset
(page 15). For example:
0=Set Selection
[Ent]=User Level
After entering your user code or presenting
your proximity tag, use the keypad to select
the option you require:
| to scroll up through the options. Only
relevant options are shown, e.g. "0=Set
Selection" is not shown if all wards are set.
¬ to scroll down through the options.
0 to set/unset wards (page 8 or 11).
r to set/unset ward groups (page 9 or 13).
] to exit without changes.
1
Engineer option 1-9-3
To Next Page
Loading...
