EasyManua.ls Logo

cor thermostat 7C - Introduction

Default Icon
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
INTRODUCTION
The Côr 5 series and Côr 7 series thermostat models are 7−day, 5/2−day, 1−day
programmable wall−mounted, low−voltage controls. The Côr 7 and Côr 7C
combines temperature and humidity control in the units. The Côr Thermostats have
no need for batteries to store user−configured settings in memory. During power
loss its internal memory saves settings for unlimited time, and the clock continues
to run for at least 12 hours.
A Two−Wire Relay Module option for the Côr 7 series thermostats allows them to
connect to a system using only two thermostat wires at the wall. The Two−Wire
Relay Module is located near the indoor equipment and two wires are used between
the thermostat and the Two−Wire Relay Module.
In the Côr thermostat programmable configuration, different heating and cooling
setpoints and times are programmable for 4 periods per day or 2 periods per day.
Programming can be done for 7 days per week, 5/2 days per week, or 1 day. The
programmable thermostat can also be user configured as a non−programmable
thermostat. When operating as non−programmable, the Côr Thermostat will still
have temperature control and in the Côr 7 series, humidity control. The Côr 7 series
Thermostat features Touch−N−Gor settings for quick and easy temperature change
without complicated programming schedules.

Table of Contents