To Next PageTo Next PageWhy Corghi A 9222 HP TI Tyre Changers table top rotate pedal does not return to its home position?
If the table top rotate pedal does not return to its home position, the control spring is broken. Change the control spring.
Why Corghi A 9222 HP TI Tyre Changers inflation gauge needle does not go back to “0”?
If the inflation gauge needle does not return to “0”, it could be due to a defective gauge or the gauge being damaged by impacts. Change the gauge.
General| Category | Tyre Changers |
|---|---|
| Manufacturer | Corghi |
| Model | A 9222 HP TI |
| Operating Pressure | 8-10 bar |
| Air Pressure | 8-10 bar |
| Maximum Rim Diameter | 22 inches |
| Minimum Rim Diameter | 10 inches |
