Need help?Do you have a question about the Corghi EM8540 and is the answer not in the manual?
General| Brand | Corghi |
|---|---|
| Model | EM8540 |
| Category | Wheel Balancers |
| Language | English |
Allows selection of operator and stores working environment data.
Calibrates machine sensitivity when prompted or if calibration is outside tolerance.
Enables or disables automatic weight position search functionality.
Sets display for unbalance, diameter, and width measurements with precision options.
Shows the current software version, release date, model, and country.
Displays and checks the phase calibration coefficient values against allowed range.
Checks pickup signals, phase difference, and amplifier calibration.
Checks the operation of the search circuit board and encoder for shaft position.
Displays signals from diameter, distance, and width sensors as they are moved.
Sets or modifies the default speed for data acquisition in spin cycles.
Checks and controls the operation of the electrical actuator for spin/brake positions.
Displays counters for spin cycles, sensitivity calibration, and actuator cycles.
Procedure for removing the weight-holder lid for maintenance access.
Instructions for updating the MBE161 motherboard firmware using a portable programmer.
Guide for replacing the inside sensor, reed microswitch, and encoders.
Steps for replacing and adjusting the outside sensor potentiometer for width measurements.
Procedure for replacing and adjusting the machine's pickups.
Instructions for replacing the brake pedal switch.
Guide for replacing the central unit of the balancing machine.
Procedure for replacing pneumatic cylinder gaskets when leaks or defects occur.
Steps for replacing the electrical actuator within the spin unit assembly.
Guide for removing and installing the friction roller on the spin unit.
Procedure for replacing the brake shoe assembly.
Steps for replacing the motor assembly for the spin unit.
Lists and explains various error messages displayed by the machine for troubleshooting.
To Next Page
