cormidi 65 Series - SAFETY TAGS

General Information
7
fig. 2 – Safety Devices
1.7. A CCESSORIES
READ CAREFULLY:
Read the instructions
and the mode of use for the accessories that
have been installed on your machine carefully.
Refer to the instruction manua
l that was
provided with them.
The machine is furnished with equippment to make it
possible to carry out normal maintenance operations.
It is also equipped with a hydraulic force instrument: in
the manual the instructions for its use have been
furnished.
Also, the machine the may also be equipped upon
request with particular tools including:
• Cement mixer for mixing concrete;
• Auto-loading tools;
• Excavator;
• Demolition hammer.
1.8. S AFETY T AGS
READ CAREFULLY: During the design phase
everything possible was done to prevent
eventual risks: where it was technically
impossible, specific
pictograms were resorted
to in order to highlight
eventual potential and
imminent risks.
Specific adhesiv
e tags were made with
signals and descriptions associated with
pictograms to give a higher importance to
possible dangers, in accordance with
government norms UNI 9244-95 (E).