Need help?Do you have a question about the corob CLEVERmix 700 and is the answer not in the manual?
General| Brand | corob |
|---|---|
| Model | CLEVERmix 700 |
| Category | Industrial Equipment |
| Language | English |
Provides instructions on machine use and routine maintenance to uphold performance and avoid accidents.
Explains graphical conventions used for warnings, instructions, and tools.
Defines key roles like Operator and Maintenance Technician.
Details the gyroscopic mixer CLEVERmix 700, its capabilities, door types, and certifications.
Lists detailed technical specifications like mixing speed, time, weight capacity, and dimensions.
Specifies the professional use of the machine and defines improper usage.
Describes the machine's identification plate details.
Mandatory and prohibited actions for safe operation and use.
Guidelines for safe electrical connections, grounding, and avoiding shocks.
Safety precautions when using tinting products, including MSDS consultation.
Identifies residual risks and corresponding preventive measures, PPE, and manual references.
Identifies residual risks and corresponding preventive measures, PPE, and manual references.
Illustrates the location of identification and warning labels on the machine.
Describes the emergency stop button and door safety mechanisms.
Explains how to use the emergency stop button and its reset procedure.
Details procedures for repositioning the mechanics and unlocking doors after an emergency stop.
Specifies environmental requirements for machine installation, including ventilation and temperature.
Emphasizes the need for personal protective equipment and careful handling.
Provides step-by-step instructions for unpacking and positioning the machine.
Highlights PPE requirements and essential safety checks before starting.
Details electrical grounding requirements and procedures for ETL certified machines.
Information on power supply voltage, adapters, and recommendations against using extension cords.
Explains the function of the control panel keys and display.
Details the machine's electrical connection points and components.
Describes the main power switch, fuse housing, and power supply plug.
Details the USB port for service computer connection.
Step-by-step guide for powering up the machine and initial display information.
Lists information shown on the display upon start-up, including firmware and cycle counts.
Instructions on how to properly turn off the machine.
Essential safety precautions for operators, including PPE and forbidden actions.
Guidelines for safely loading cans, including weight limits and can placement.
Step-by-step guide for loading cans, securing handles, and sealing lids.
Instructions for using the multi-can adapter and splash-guard.
Guide for executing a mixing cycle, including program selection and start/stop.
Procedures for opening and closing the machine door before and after mixing.
How to start the fully automatic mixing cycle using the AUTO key.
How to select and start pre-programmed mixing cycles.
How to adjust the mixing time before starting the cycle.
Instructions for starting, stopping, and completing a mixing cycle.
How to manually stop a mixing cycle before its scheduled end.
Explains how the machine signals anomalies and malfunctions using error codes.
Explains how the machine signals anomalies and malfunctions using error codes.
Details specific error codes like EMERGENCY, CLOSE THE DOOR, and PUSH PLATE IN.
Covers errors related to initial setup, repositioning, and motor faults.
Explains error codes for cans being too large or too small.
Addresses encoder errors and unexpected door movements.
Safety precautions before performing maintenance, including unplugging the machine.
Guidelines for cleaning the machine, emphasizing no solvents or water jets.
Instructions for cleaning the exterior and interior of the machine.
Details lubrication steps for clamping screws, sliding guides, and door guides.
Specific lubrication instructions for the gear rack of the automatic vertical sliding door.
Steps to clean and lubricate door and extractable plate sliding guides.
Specific instructions for lubricating the gear rack on automatic doors.
Lists key technical parameters like voltage, frequency, power, noise, and operating conditions.
Provides detailed physical dimensions and weight specifications for the machine.
States compliance with relevant EU directives.
Details warranty validity, service contact, and conditions that void the warranty.
To Next Page
