Coros VERTIX User Manual

Operate the COROS VERTIX watch
Start, turn off, restart and reset
 - Start
o Press and hold the middle button (Digital Dial/CONFIRM) for 2 seconds or until the
COROS logo shows up.
 - Turn off
o Main watch face > System > More Settings > Turn Off
 - Restart
o Press and hold the middle button (Digital Dial/CONFIRM) for 15 seconds or until the
COROS logo shows up.
o Alternatively, turn off the watch by main watch face > System > More Settings > Turn
Off. Then turn it back on.
 - Reset
o Main watch face > System > More Settings > Reset All.

Coros VERTIX Specifications

General

Display Size	1.2 inches
Display Type	Memory LCD
Display Resolution	240 x 240 pixels
Screen Material	Sapphire Glass
Weight	76 grams
Dimensions	47 x 47 x 15.6 mm
Bezel Material	Titanium
Cover Material	Titanium
Band Material	Silicone
Operating Temperature	-4°F to 140°F (-20°C to 60°C)
Connectivity	Bluetooth
Compatibility	iOS, Android
Battery Life	Up to 45 days
Water Resistance	150 meters
GPS	Yes
Sensors	Optical heart rate, barometric altimeter, accelerometer, compass, gyroscope, thermometer
Charging Time	2 hours
Materials	Titanium, Sapphire Glass, Silicone

Summary

Start, Turn Off, Restart and Reset

Start the Watch

Press and hold the middle button for 2 seconds or until the COROS logo appears.

Turn Off the Watch

Navigate to Main watch face > System > More Settings > Turn Off.

Restart the Watch

Press and hold the middle button for 15 seconds or until the COROS logo appears.

Reset the Watch

Navigate to Main watch face > System > More Settings > Reset All.

Device Overview

Button 1 (LIGHT)

Press to activate and deactivate backlight.

Button 2 (Digital Dial/CONFIRM)

Rotate to select, press to confirm, hold to finish workout or power on.

Button 3 (BACK/LAP)

Press to return to previous screen or record lap; hold for toolbox.

Can't Turn On the COROS Watch

Can't Unlock the COROS Watch

Auto Lock – Hold to Unlock

Press and hold the Digital Dial or BACK/LAP button to unlock the display.

Auto Lock – Scroll to Unlock

Scroll the Digital Dial in any direction until the meter bar reaches top.

Adjusting Auto Lock Mode Settings

Configure Auto Lock via System > More Settings > Auto Lock.