Corradi EXYL - Resolution of Problems with the Electric Drive Mechanism

CHECKS AND SOLUTIONS
Check the electric current.
Check that the plug is correctly connected to a suitable socket.
Wait 5-10 minutes to allow the motor to cool down. If the
problem persist check the limit switch.
Change the remote battery.
Open the control panel and change the fuse.
Contact dealer.
Clean the runners. Follow instructions in chapter on
maintenance. Realign the runners.
CAUSE
There is no electricity.
It is not plugged in.
The motor has overheated and the led on the control panel is
lit.
Depleted remote control batteries.
Broken fuse.
Possibly broken belts, or disconnection from drive shaft.
Dirty runners, runners not properly aligned.
RESOLUTION OF PROBLEMS WITH THE ELECTRIC DRIVE MECHANISM
PROBLEM
The motor won’t start.
The motor starts but the awning won’t move.
The awning moves erratically.
Check the electric current.
Check that the plug is correctly connected to a suitable socket.
Wait 5-10 minutes to allow the motor to cool down. If the
problem persist check the limit switch.
Set the limit switch.
Contact dealer.
Clean the runners. Follow instructions in chapter on
maintenance. Realign the runners.
There is no electricity.
It is not plugged in.
The motor has overheated.
Problem setting the limit switch.
Possibly broken belts, or disconnection from drive shaft.
Dirty runners, runners not properly aligned.
The motor won’t start.
The motor starts but the awning won’t move.
The awning moves erratically.
EXYL
With remote computing system exchange
EXYL
Without remote computing system exchange
2 - 04.2011
CORRADI S.P.A. - USER MANUAL - EXYL
30 of 109