Hi-Speed USB Portable Flash Disk User’s Manual Guide
Page 9
Partition
Before you can fully use the security features of the USB Flash Disk Utility, you
first need to create two partitions on your device. The Partition button allows you
to define the size of the partitions. The Standard Disk partition will be your
normal unsecured and accessible disk while the Security Disk partition will be your
secured disk that is locked with a user defined password.
1. Click Partition button from the Utility menu. You will see the Partition dialog
box. Move the slide bar to adjust the partition size for standard and security
disk. The security disk partition can be protected by password and is hidden
until you activate the USB Flash Disk Utility program and enter the correct
password.
Note: For two-partition disks, you must set a minimum standard disk size of
8MB. If you already set a password before running partition and you set one
partition disk, the password will automatically be erased.
Note: If you set a password on the Secured Partition disk, you will need to
install the USB Flash Disk Utility on any computer where you will plug-in the
device. Otherwise, you will not be able to access the Secured Partition disk on
other computers.
2. Once you have decided how to partition your USB Flash disk, click Start to
begin. A warning message will appear informing you that all data inside the
disk will be erased. Click OK to continue. This process will also format the disk
so you don’t need to format the disk again. When finished, you must unplug
and plug the device for the new partition to take effect.
To Next Page
Loading...
