Need help?Do you have a question about the Corsair H80i and is the answer not in the manual?
General| Type | Liquid CPU Cooler |
|---|---|
| Radiator Size | 120mm |
| Fan Size | 120mm |
| Radiator Material | Aluminum |
| Fan Dimensions | 120mm x 120mm x 25mm |
| Fan Airflow | 77 CFM |
| Tube Length | 300mm |
| Software Control | Corsair Link |
| Compatibility | Intel LGA 1150, 1151, 1155, 1156, 1366, 2011, 2011-3, AMD AM2, AM3, FM1, FM2 |
| LED Lighting | RGB |
| Fan Speed | Up to 2700 RPM |
| Noise Level | 37.68 dBA |
| Radiator Dimensions | 152 x 120 x 38 mm |
Lists all components provided with the CPU cooler for installation.
Attach the radiator and fans to the PC case, recommended as air-intake.
Mount the backplate on the motherboard for Intel socket compatibility.
Secure the standoff screws onto the motherboard, using correct type for socket.
Attach the mounting bracket onto the top of the pump unit.
Align and secure the pump unit onto the motherboard using the bracket.
Connect the pump power header to PSU and RPM wire to motherboard.
Use the Y cable to attach the two fans to the pump's power header.
Connect the pump unit to a motherboard USB header for control.
Lists all components provided with the CPU cooler for AMD installation.
Attach the radiator and fans to the PC case, recommended as air-intake.
Insert and align the mounting bracket onto the pump unit.
Insert AMD screw clips and secure with screws, do not fully tighten.
Align bracket with AMD clips and secure pump unit with thumb screws.
Connect pump power header to PSU and RPM wire to motherboard.
Use the Y cable to attach the two fans to the pump's power header.
Connect the pump unit to a motherboard USB header for control.
To Next Page
