2
ENGLISH
ENGLISH
COMMANDER CORE UPDATE
Please ensure you’ve updated your Elite Capellix’s rmware PRIOR
to installation. Failure to update rmware will result in Commander CORE
not recognizing the LCD Kit. The LCD will then return a general
fault (!) error.
Please ensure you power down your entire PC before installation.
This product, the pump, and the Commander CORE are sensitive to
hotplugging and ESD.
In iCUE, click on your Commander CORE or
ELITE CAPELLIX cooler and select ‘Device
Settings’.
Under ‘Device Settings’ you will have the
ability to check for rmware updates.
To Next Page
Loading...
Need help?
General
