15 16
RMx SERIES
™
RMx SERIES
™
Safety and agency approvals
Agency Standard
FCC FCC Rules Part 15, Class B
ICES ICES-003
CE EN 55022: 2010, Class B
CISPR 22: 2008, Class B
AS/NZS CISPR 22: 2009, Class B
EN61000-3-2: 2006 + A1: 2009+A2: 2009, Class D
EN61000-3-3: 2008
EN55024: 2010
IEC61000-4-2: 2008 ED.2.0
IEC61000-4-3: 2010 ED.3.2
IEC61000-4-4: 2012 ED.3.0
IEC61000-4-5: 2005 ED.2.0
IEC61000-4-6: 2008 ED.3.0
IEC61000-4-8: 2009 ED.2.0
IEC61000-4-11: 2004 ED.2.0
C TUV-US(American) UL 60950-1: 2007
RCM AS/NZS 4417,AS/NZS CISPR22
TUV EN 60950-1: 2006+A11+A1+A12+A2
CB IEC 60950-1: 2005+A1+A2
CCC GB4943.1-2011
GB9254-2008
GB17625.1-2003
CNS13438
CU TR R IEC 60950-1-2005
R 51318.22-99
R 51318.24-99
R 51317.3.2-2006
R 51317.3.3-99
ROHS 2002/95/EC, Restriction of Hazardous Substances Directive
WEEE 2002/96/EC, Waste Electrical and Electronic Equipment Directive
ROHS (China) China Order No.39, Administration on the Control of Pollution Caused By
Electronic Information Products
KC K60950-1, K00022, K00024
BSMI CNS14336, CNS13438
Important safety information
CAUTION ELECTRIC SHOCK HAZARD!
1. Install in accordance with all manufacturer instructions and safety warnings.
Failure to do so may result in damage to your power supply or system, and may
cause serious injury or death.
2. High voltages are present in the power supply. Do not open the power supply case
or attempt to repair the power supply; there are no user-serviceable components.
3. This product is designed for indoor use only.
4. Do not use the power supply near water, or in high temperature or high humidity
environments.
5. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus that produce heat.
6. Do not insert any objects into the open ventilation or fan grill area of the power supply.
7. Do not modify the cables and/or connectors included with this power supply.
8. If this power supply uses modular cables, use only manufacturer supplied cables.
Other cables might not be compatible and could cause serious damage to your
system and power supply.
9. The 24-pin main power connector has a detachable 4-pin connector. This 4-pin
connector is not a P4 or ATX 12V connector. Do not force this cable in the P4 or
ATX +12V socket on the motherboard.
10. Failure to comply with any manufacturer instructions and/or any of these safety
instructions will immediately void all warranties and guarantees.
To Next Page
Loading...
Need help?
General
