Cortalk uDL1 - Page 20

MOBILTEX® DATA LTD.
Calgary, Alberta
www.corTalk.com
TITLE: uDL1 Configuration and Operation Guide
DOCUMENT NO.:
UDL1-MAN-001
SHEET:
20 of 26
REV:
1.07
The “Read Master Data File” button can be used to load a previously stored measurement file into the data chart memory.
Data charts can be printed and saved.
After the data has been extracted from the uDL1, the data memory on the device may be cleared by clicking the “Clear
Memory” button. Note that clearing memory may take up to 30s to complete.