1. Connected mode: Keep the controller turned on, when the gamepad is charging, the
indicator light that shows the current mode will blink slowly; when it’s fully charged, the
indicator light will stop blinking and couple of minutes later, the indicator light will turn
off and the controller goes into sleep.
Example: When the gamepad connects computer under Xinput mode (the First indicator light is
On), when the controller is charging, the First indicator light will blink slowly; when it’s fully
charged, the First indicator light will stop blinking and couple of minutes later, no action operation,
the indicator light stays off, the controller goes into sleep.
2. Disconnected mode: when the gamepad is charged, the Four indicator lights will blink
slowly; when it’s fully charged, the Four indicator lights will blink quickly. 1 minute later,
the indicator light stays off, the controller goes into sleep.
Info: The charging time is 2 to 3 hours for life-time of Approx 12 hours of non-stop play!
Sleeping mode:
1. Disconnected mode: the Four indicator lights will blink quickly, 1 minute later, the indicator
lights stay off, the controller goes into sleep.
2. Connected mode: the indicator light will keep light, no action operation, 5 minutes later, the
indicator lights stay off, the controller goes into sleep.
Info: you can press HOME button to wake up the controller.
INSTALLATION AND USE:
HOW TO SWITCH THE MODE TO DINPUT OR XINPUT MODE?
When your controller is connected to your PC with Xinput mode, the First LED light will lit up.
you can switch Dinput mode by pressing [Home] button on your controller for 5 seconds: The First
LED and Second LED light will lit up under Analog mode; pressing [Home] button for a while, the
First LED will lit up under Digital mode.
To return Xinput mode, press again the [Home] button on your controller for 5 seconds.
To Next Page
Loading...