10
ELECTRICAL REQUIREMENTS
If codes permit and a separate ground wire is used, it is recommended that a qualified
electrical installer determine that the ground path and wire gauge are in accordance with local
codes.
Check with a qualified electrical installer if you are not sure the cooktop is properly grounded.
Make sure that the electrical connection and wire size are adequate and in conformance with
the National Electrical Code, ANSI/NFPA 70-latest edition or CSA Standards C22.1-94,
Canadian Electrical Code, Part 1 and C22.2 No. O-M91-latest edition, and all local codes and
ordinances.
A copy of the above code standards can be obtained from the following:
National Fire Protection Association
1 Batterymarch Park
Quincy, MA 02169-7471
(Continued on next page)
CSA International
8501 East Pleasant Valley Road
Cleveland, OH 44131-5575
INSTALLATION REQUIREMENTS
Disconnect power before servicing.
Use 8-Gauge copper wire.
Electrically ground the cooktop.
Failure to follow these instructions can result in
death, fire, or electrical shock.
WARNING!
ELECTRICAL
SHOCK HAZARD
To Next Page
Loading...
Need help?
General
