17
COMPLETE INSTALLATION
1. Check that all parts are now installed. If there is an extra part leftover, go back
through the installation steps to determine what may have been missed or skipped.
2. Check that you have all your tools.
3. Dispose of / recycle all packaging materials.
4. Use a mild solution of liquid household cleaner and warm water to clean cooktop
5. before use. Dry thoroughly with a soft cloth. For more information, see the “Care &
Maintenance” section in the User Manual.
6. Read the entire “Operating Instructions” section in the User Manual.
7. Reconnect power.
NOTE: If the cooktop does not work after turning on the power, check that a circuit breaker
has not tripped or a household fuse has not blown. See “Troubleshooting” in the User
Manual for further information.
If you need assistance or service, please refer to sections "Warranty & Service" on Pages
18-19 of this manual.
INSTALLATION INSTRUCTIONS
To Next Page
Loading...
