OIL CUP INSTALLATION
PUSH BUTTON CONTROLS
MAINTENANCE
CAUTION: NEVER PUT YOUR HAND INSIDE OF THE UNIT WHILE ITS OPERATING. FOR THE BEST PERFORMANCE CLEAN YOUR RANGE HOOD REGULARLY.
CLEANING
1. Use only mild soap or cleaning solutions to clean the range hoods outer surface. Dry surfaces using a soft
2. Stainless Steel cleaner may be used on the external
3. Cleaning the Baffle Filters: For daily cleaning, use hot, soapy water and a soft Wipe dry and finish with a damp micro-fiber cloth. Baffle filters can also be cleaned in the dishwasher.
4. Clean the Range Hood assembly once every 6
5. DO NOT clean the motor or electrical components with water or any other liquid
REPLACING LIGHT BULBS
CAUTION: LAMP UNIT MAY BE HOT! WAIT UNTIL THE UNIT IS COOL. BEFORE ATTEMPTING TO REPLACE THE LEO LAMPS MAKE SURE THE UNIT IS POWERED OFF AND
UNPLUGGED.
Note: Individual LED bulbs cannot be replaced only LED lamps.
1. Remove the baffle filters
2. Find the wire connection of the lamp and
3. Remove old LED
4. Plugin new LED
TROUBLESHOOTING
CAUTION: ALWAYS UNPLUG UNIT FROM POWER BEFORE SERVICING
To Next Page
Loading...
Need help?
General
