Cosmo F965 - Page 48

■ Are the burner ports clogged?
See “Care and Cleaning” section.
SURFACE
BURNERS ARE UNEVEN, YELLOW AND/OR NOISY
■ Are the burner ports clogged?
See “Care and Cleaning” section.
■ Are the burner caps positioned properly?
See “Placement of Burner Heads and Caps” section.
■ Is propane gas being used?
The range may have been converted improperly. Contact a qualified service technician. See
“Liquid Petroleum (Propane) Gas Conversion” section.
SURFACE
BURNER MAKES POPPING NOISES
■ Is the burner wet?
Let it dry.
EXCES
S HEAT AROUND COOKWARE ON COOKING SURFACE
■ Is the cookware the proper size?
Use cookware about the same size as the surface cooking area, element or surface burner.
Cookware should not extend more than ½" (1.3 cm) outside the cooking area.
COOKTOP COOKING RESULTS NOT WHAT EXPECTED
■ Is the proper cookware being used?
See “Surface Cooking Utensils” section.
■ Is the control knob set to the proper heat level?
See “Setting Surface Controls” section.
■ Is the range level?
Level the range. See the “Unpack Range / Install Leveling Feet and Back Panel” section.
OVEN WILL NOT OPERATE
■ Are the oven controls set correctly?
See “Setting Oven Controls” section.
48